Category: Mag Parts

$27.99
+1 For the Glock 27

*These Extensions are designed to fit Gen4 magazines with two cutouts for the magazine catch, some older gen 3 magazines will not allow these extensions to lock into the firearm. Please make sure to install these on magazines with cutouts on both sides of the magazine.*

  • This product is made 100% in the USA

**These mag extensions aren’t for sale to California residents. Due to the potential of bringing your magazine over the legal 10 round limit. An E-mail will be issued to the customer, notifying them of a full refund.**

**Buyer is responsible to follow all City, State, and Federal gun laws.**

ALL COLORS ARE PROPRIETARY AND NOT MEANT TO MATCH GLOCK OR ANY OTHER MANUFACTURER.

  • BLACK
  • BLUE
  • FDE
  • GRAY
  • OD GREEN
  • PURPLE
  • RED
  • COPPER

The next model of Hyve Technologies magazine extensions has arrived!! A plus 1 for the Glock 27. In the classic Hyve style we follow the lines of the grip and give the 27 a full-size feel. We have a straight spring push and do not require and do NOT recommend a plus spring. Like all of our products, these are machined in house And then anodized in our seven colors. Unlike the single stack designs, the 27 plus 1 features a two piece design with Our Mag-Stop holding the magazine securely in place.

DISCLAIMER: ‘GLOCK’ is a federally registered trademark of GLOCK, Inc. or Glock Ges.m.b.H and is one of many trademarks owned by GLOCK, Inc. Neither Hyve Technologies nor this site are affiliated with, or otherwise endorsed by, GLOCK, Inc. or Glock Ges.m.b.H. The use of ‘GLOCK’ on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For genuine GLOCK products and parts visit www.glock.com.

$27.99
+1 For the Glock 33

**These mag extensions aren’t for sale to California residents. Due to the potential of bringing your magazine over the legal 10 round limit. An E-mail will be issued to the customer, notifying them of a full refund.**

*These Extensions are designed to fit magazines with two cutouts for the magazine catch, some older gen 3 magazines will not allow these extensions to lock into the firearm. Please make sure to install these on magazines with cutouts on both sides of the magazine.*

The next model of Hyve Technologies magazine extensions has arrived!! A plus 1 for the Glock 33. In the classic Hyve style we follow the lines of the grip and give the 33 a full-size feel. We have a straight spring push and do not require and do NOT recommend a plus spring. Like all of our products, these are machined in house And then anodized in our seven colors. Unlike the single stack designs, the 33 plus 1 features a two piece design with Our Mag-Stop holding the magazine securely in place.

ALL COLORS ARE PROPRIETARY AND NOT MEANT TO MATCH GLOCK OR ANY OTHER MANUFACTURER.

  • BLACK
  • BLUE
  • FDE
  • GRAY
  • OD GREEN
  • PURPLE
  • RED
  • COPPER

DISCLAIMER: ‘GLOCK’ is a federally registered trademark of GLOCK, Inc. or Glock Ges.m.b.H and is one of many trademarks owned by GLOCK, Inc. Neither Hyve Technologies nor this site are affiliated with, or otherwise endorsed by, GLOCK, Inc. or Glock Ges.m.b.H. The use of ‘GLOCK’ on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For genuine GLOCK products and parts visit www.glock.com.

**Buyer is responsible to follow all City, State, and Federal gun laws.**

  • This product is made 100% in the USA

 

Sale!
$29.99 $27.99
+1 for the Glock 36 Pad
  • This product is made 100% in the USA

Introducing the new Hyve +1 for the Glock 36. It is Machined in house from solid bar stock of 6061 T6 aluminum and then Anodized. This +1 will give you the added ammunition you desire while staying as uniform with your gun’s frame as possible. It features our two piece design that utilizes a Mag-Stop to ensure your mag won’t pop out of the extension.

**ALL COLORS ARE PROPRIETARY AND NOT MEANT TO MATCH GLOCK OR ANY OTHER MANUFACTURER.**

DISCLAIMER: ‘GLOCK’ is a federally registered trademark of GLOCK, Inc. or Glock Ges.m.b.H and is one of many trademarks owned by GLOCK, Inc. Neither Hyve Technologies nor this site are affiliated with, or otherwise endorsed by, GLOCK, Inc. or Glock Ges.m.b.H. The use of ‘GLOCK’ on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For genuine GLOCK products and parts visit www.glock.com.

ALL COLORS ARE PROPRIETARY AND NOT MEANT TO MATCH ANY  MANUFACTURER COLORS.

  • BLACK
  • BLUE
  • FDE
  • GRAY
  • OD GREEN
  • PURPLE
  • RED
$21.99
+1 For the Glock 43

**This will only fit the Glock 43**

  • This product is made 100% in the USA

Hyve Technologies Presents The +1 Base Pad for The Glock 43. It is Machined in house from solid bar stock of 6061 T6 aluminum and then Anodized. This +1 will give you one added round while staying as uniform with your gun’s frame as possible. It will also add stability for those of us with larger hands as increases the grip area. It features a simple Snap-in design that pops on and stays on.

ALL COLORS ARE PROPRIETARY AND NOT MEANT TO MATCH GLOCK OR ANY OTHER MANUFACTURER.

  • BLACK
  • BLUE
  • FDE
  • GRAY
  • OD GREEN
  • PURPLE
  • RED
  • COPPER

DISCLAIMER: ‘GLOCK’ is a federally registered trademark of GLOCK, Inc. or Glock Ges.m.b.H and is one of many trademarks owned by GLOCK, Inc. Neither Hyve Technologies nor this site are affiliated with, or otherwise endorsed by, GLOCK, Inc. or Glock Ges.m.b.H. The use of ‘GLOCK’ on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For genuine GLOCK products and parts visit www.glock.com.

$21.99
+1 For the Glock42

**This will only fit the Glock 42**

  • This product is made 100% in the USA

Hyve Technologies Presents The +1 Base Pad for The Glock 42. It is Machined in house from solid bar stock of 6061 T6 aluminum and then Anodized. This +1 will give you one added round while staying as uniform with your gun’s frame as possible. It will also add stability for those of us with larger hands as increases the grip area. It features a simple Snap-in design that pops on and stays on.

ALL COLORS ARE PROPRIETARY AND NOT MEANT TO MATCH GLOCK OR ANY OTHER MANUFACTURER.

  • BLACK
  • BLUE
  • FDE
  • GRAY
  • OD GREEN
  • PURPLE
  • RED
  • COPPER

DISCLAIMER: ‘GLOCK’ is a federally registered trademark of GLOCK, Inc. or Glock Ges.m.b.H and is one of many trademarks owned by GLOCK, Inc. Neither Hyve Technologies nor this site are affiliated with, or otherwise endorsed by, GLOCK, Inc. or Glock Ges.m.b.H. The use of ‘GLOCK’ on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For genuine GLOCK products and parts visit www.glock.com.

Sale!
$29.99 $27.99
+1 for the Shield .45 pad
  • This product is made 100% in the USA

We are proud to introduce the newest member of the Hyve Technologies Mag Extension family. The Shield .45 +1. Unlike our other Shield extensions, this +1 features our new snap in design, followed up with a set screw to add extra insurance for your mag not to slide off the back of the extension.

*This extension is a +1 for the 7 Rd Magazine, Does NOT work on the 6 Rd Magazine.*

**Has not been tested with/May NOT fit Shield PERFORMANCE models**

ALL COLORS ARE PROPRIETARY AND NOT MEANT TO MATCH ANY  MANUFACTURER COLORS.

  • BLACK
  • BLUE
  • FDE
  • GRAY
  • OD GREEN
  • PURPLE
  • RED
Sale!
$29.99 $27.99
+2 for the Glock 23 Pad
  • This product is made 100% in the USA

**This is designed to only work with the Gen4 13rd Mag**

**This will only fit the Glock 23**

**This Extension will DOES NOT work with aftermarket Mag Wells**

**These mag extensions aren’t for sale to California residents. Due to the potential of bringing your magazine over the legal 10 round limit. An E-mail will be issued to the customer, notifying them of a full refund.**

**Buyer is responsible to follow all City, State, and Federal gun laws.*

ALL COLORS ARE PROPRIETARY AND NOT MEANT TO MATCH ANY  MANUFACTURER COLORS.

  • BLACK
  • BLUE
  • FDE
  • GRAY
  • OD GREEN
  • PURPLE
  • RED
$27.99
+2 For the Glock 26

**These mag extensions aren’t for sale to California residents. Due to the potential of bringing your magazine over the legal 10 round limit. An E-mail will be issued to the customer, notifying them of a full refund.**

*These Extensions are designed to fit Gen4 magazines with two cutouts for the magazine catch, some older gen 3 magazines will not allow these extensions to lock into the firearm. Please make sure to install these on magazines with cutouts on both sides of the magazine.*

**Buyer is responsible to follow all City, State, and Federal gun laws.**

  • This product is made 100% in the USA

ALL COLORS ARE PROPRIETARY AND NOT MEANT TO MATCH GLOCK OR ANY OTHER MANUFACTURER.

  • BLACK
  • BLUE
  • FDE
  • GRAY
  • OD GREEN
  • PURPLE
  • RED
  • COPPER

The next model of Hyve Technologies magazine extensions has arrived!! A plus 2 for the Glock 26. In the classic Hyve style we follow the lines of the grip and give the 26 a full-size feel. We have a straight spring push and do not require and do NOT recommend a plus spring. Like all of our products, these are machined in house And then anodized in our seven colors. Unlike the single stack designs, the 26 plus 2 features a two piece design with Our Mag-Stop holding the magazine securely in place.

DISCLAIMER: ‘GLOCK’ is a federally registered trademark of GLOCK, Inc. or Glock Ges.m.b.H and is one of many trademarks owned by GLOCK, Inc. Neither Hyve Technologies nor this site are affiliated with, or otherwise endorsed by, GLOCK, Inc. or Glock Ges.m.b.H. The use of ‘GLOCK’ on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For genuine GLOCK products and parts visit

Sale!
$24.99 $21.99
+2 For the Glock 43 Pad
  • This product is made 100% in the USA

Hyve Technologies Presents The Plus 2 Base Pad for The Glock 43. It is Machined in house from solid bar stock of 6061 T6 aluminum and then Anodized. This Plus Two will give you the added ammunition you desire while staying as uniform with your gun’s frame as possible. It will also add stability for those of us with larger hands as increases the grip area. It features a simple Snap-in design that pops on and stays on.

ALL COLORS ARE PROPRIETARY AND NOT MEANT TO MATCH GLOCK OR ANY OTHER MANUFACTURER.

  • BLACK
  • BLUE
  • FDE
  • GRAY
  • OD GREEN
  • PURPLE
  • RED
  • COPPER

DISCLAIMER: ‘GLOCK’ is a federally registered trademark of GLOCK, Inc. or Glock Ges.m.b.H and is one of many trademarks owned by GLOCK, Inc. Neither Hyve Technologies nor this site are affiliated with, or otherwise endorsed by, GLOCK, Inc. or Glock Ges.m.b.H. The use of ‘GLOCK’ on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For genuine GLOCK products and parts visit www.glock.com.

Sale!
$29.99 $27.99
+3 for the Glock 19 Pad
  • This product is made 100% in the USA

**This is designed to only work with the Gen 4 15rd Mag**

**This will only fit the Glock 19**

**This Extension will DOES NOT work with aftermarket Mag Wells**

**These mag extensions aren’t for sale to California residents. Due to the potential of bringing your magazine over the legal 10 round limit. An E-mail will be issued to the customer, notifying them of a full refund.**

**Buyer is responsible to follow all City, State, and Federal gun laws.**

ALL COLORS ARE PROPRIETARY AND NOT MEANT TO MATCH ANY  MANUFACTURER COLORS.

  • BLACK
  • BLUE
  • FDE
  • GRAY
  • OD GREEN
  • PURPLE
  • RED
$5.99
Individual G26/27/33 Mag-Stops

**These are for and will only fit the 26/27/33 Mag Extensions**

  • This product is made 100% in the USA

Want to switch up your color scheme, without having to buy all new extensions? These are the answer! We are now offering you our Mag-Stops for the Shield 9mm/.40. These are anodized to match our Shield Mag Extensions.

ALL COLORS ARE PROPRIETARY AND NOT MEANT TO MATCH GLOCK OR ANY OTHER MANUFACTURER.

  • BLACK
  • BLUE
  • FDE
  • GRAY
  • OD GREEN
  • PURPLE
  • RED

DISCLAIMER: ‘GLOCK’ is a federally registered trademark of GLOCK, Inc. or Glock Ges.m.b.H and is one of many trademarks owned by GLOCK, Inc. Neither Hyve Technologies nor this site are affiliated with, or otherwise endorsed by, GLOCK, Inc. or Glock Ges.m.b.H. The use of ‘GLOCK’ on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For genuine GLOCK products and parts visit www.glock.com.

$11.99
Large Mag Base

**These will ONLY fit the .45acp or 10mm**

  • This product is made 100% in the USA

Want your Glock to stand out? Want to be able to easily identify your mag while at the range or during a class? This Mag Base will do exactly that. Being machined from aluminum means it’s stronger and more durable. Designed to replace the standard plastic one that comes stock on all Glock mags. This Mag Base will turn heads no matter where you go.

ALL COLORS ARE PROPRIETARY AND NOT MEANT TO MATCH GLOCK OR ANY OTHER MANUFACTURER.

  • BLACK
  • BLUE
  • FDE
  • GRAY
  • OD GREEN
  • PURPLE
  • RED
  • COPPER

DISCLAIMER: ‘GLOCK’ is a federally registered trademark of GLOCK, Inc. or Glock Ges.m.b.H and is one of many trademarks owned by GLOCK, Inc. Neither Hyve Technologies nor this site are affiliated with, or otherwise endorsed by, GLOCK, Inc. or Glock Ges.m.b.H. The use of ‘GLOCK’ on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For genuine GLOCK products and parts visit www.glock.com.

Showing 1–12 of 15 results